Vn 304 into Vr

[CORNY4]

Hey guys, Sorry if it's been covered before, but couldn't find anything on it.

I have a Vn 304 Motor, t5 gearbox and loom/ECU. (Note: it doesn't have a oxy sensor)

And wanting to put it in a Vr/Vs v6 wagon.

Does the BCM Module cause problems?

or having no oxy sensor from factory, Does that cause any issues?

Thanks in advance!

Mike

 

[Not_An_Abba_Fan]

If it was from a VN, it would have the O2 sensor, if it doesn't, someone has removed it. You won't be allowed to fit it as it won't comply to the later emissions standards of the VR/VS. If you can get it to the same emissions level as the VR/VS, then, yes, you can fit it.

 

[yoshi87]

from wat i can remember the vr oxy sensor is located on the left side extractor