VN Commodore vacuum hoses

[shamus Eltham]

Can anyone please tell me where this hose should be routed. Found it just hanging down not connected to any thing. Unsure if it should be.

 

[Immortality]

Where does the other end connect to?

 

[shamus Eltham]

Where does the other end connect to?

Other end connects to the intake manifold behind the throttle body. One hose goes to brake booster and other small hose goes to heater control valve. This hose was just hanging down. when engine running its sucking air I assume it should be attached somewhere. Cheers . Any help would be much appreciated.

 

[Immortality]

The only thing that springs to mind is the MAP sensor.

 

[woteva]

just checked some pics from a VR V6 i wrecked some years ago and the pipe on that port goes to the fuel pressure regulator but the hose is a lot shorter.

 

[Deuce]

I'm sure the other one on throttle body should go to carbon canister.

 

[HarryHoudini]

Also the breather for the Tranny sits up there.Check where the other end goes.

 

[shamus Eltham]

I'm sure the other one on throttle body should go to carbon canister.

 

[shamus Eltham]

Just read up the service and repair manual. Thinking it must be for charcoal canister, sadly a previous owner has removed it. Do I just block off or I'm I best to buy and install one.

 

[shamus Eltham]

The only thing that springs to mind is the MAP sensor.

It's not the MAP sensor hose. Think it maybe for the charcoal canister that has been removed by a previous owner.