Burning rubber
Member
- Joined
- Mar 5, 2018
- Messages
- 78
- Reaction score
- 4
- Points
- 8
- Age
- 23
- Location
- Toowoomba
- Members Ride
- VN Executive S Pac...(S for sexy)
I have a bad camber issue with the front of my vn...
When i bought it it had Sl springs and always had negative camber, and i have just put in stock height from a wagon (front) but i still have a camber issue, and i dont have much tyre left on the inside
Can i correct this by rotating that plate that the top of the spring is on? The one under bearing plate? or is it more complicated than that?
And is adjusting the toe as simple as backing off the nut behind the rod end and rotating the rod/shaft?
When i bought it it had Sl springs and always had negative camber, and i have just put in stock height from a wagon (front) but i still have a camber issue, and i dont have much tyre left on the inside
Can i correct this by rotating that plate that the top of the spring is on? The one under bearing plate? or is it more complicated than that?
And is adjusting the toe as simple as backing off the nut behind the rod end and rotating the rod/shaft?