Vn to vp converstion

[Ductape]

I just bought a auto vp and have found a manual box out of a series 2 vn has everything except manual starter motor and loom, I was wondering if there was a way to wire it up myself for the speed sensor and reverse lights and is there any real differnce between the starter motor or could I make the auto one work?

 

[flexcenlexcen]

auto starter is the same and all the wiring you need is under the console on park switch and i think reverse lights are on it all they need to be is put through the floor with female spade connectors and as far as i know the manual speedo will plug into the auto loom and work

 

[Redline16]

The netural safety switch wiring needs to be cut and soldered together to disable it

 

[Ductape]

Will I need to run a manual ecu or just leave the auto one in it? And thanks for that guys!

 

[flexcenlexcen]

the 808 ecu are both its the tune on the memcal but most of the vn vp memcals are both
http://forums.justcommodores.com.au/tuning/96150-memcal-id-codes.html
this will tell you what you have

 

[Ductape]

Thanks for that mate apprectiate it