Welcome to Just Commodores, a site specifically designed for all people who share the same passion as yourself.

New Posts Contact us

Just Commodores Forum Community

It takes just a moment to join our fantastic community

Register

VN TO VS transmissions

Rusty17

New Member
Joined
Oct 20, 2010
Messages
15
Reaction score
0
Points
0
Location
Bunbury
Members Ride
Vs commodore series 2 supercharged v6
Hey jus wonderin if the 3.8L buick block has the same gearbox holes as the 3.8L ecotech....?
 

ephect

Donating Member
Joined
Jul 27, 2006
Messages
6,016
Reaction score
15,896
Points
113
Location
Melbourne
Members Ride
VS Acclaim V6
yes they have the same bolt pattern, but VN-VP autos are cable controlled, VR-VS are electronic controlled.

what is your reason behind the question? :)
 

Rusty17

New Member
Joined
Oct 20, 2010
Messages
15
Reaction score
0
Points
0
Location
Bunbury
Members Ride
Vs commodore series 2 supercharged v6
Ohh relli?? Umm jus i got a vs burnout car and mate has 3 VN autos sittin round and he sed if they fit i can hav them as spares.... So it wont jus be able to bolt on and plug in??
 

wraith

Hand over the dog bikkies
Joined
Sep 17, 2008
Messages
5,014
Reaction score
117
Points
63
Location
Demonicaland
Members Ride
VX V6 Berlina. 2003 VW Passat
The earlier transmission will work how ever it may throw up an error code as obviously it's can't see the transmission being connected any more. Whether it throws up just the check engine light or puts it into limp home mode I am not sure.
 

Rusty17

New Member
Joined
Oct 20, 2010
Messages
15
Reaction score
0
Points
0
Location
Bunbury
Members Ride
Vs commodore series 2 supercharged v6
Ohh ok, well wont no if it brings up engine light dash is ripped out and been replaced with a more simple one... But it shud work? Or not too sure?
 

ephect

Donating Member
Joined
Jul 27, 2006
Messages
6,016
Reaction score
15,896
Points
113
Location
Melbourne
Members Ride
VS Acclaim V6
not 100% sure, but from memory the wiring plug is different.

i would have a search on the forum and have a read through some of the threads, i know its been asked before.
 

aussiesport

New Member
Joined
May 30, 2008
Messages
41
Reaction score
0
Points
0
Members Ride
vp wagger
asked a similair question before i think you only need to get the memcal or the puter redone to suit a manual box !! dont quote me tho ....
 
Top