hemiceni
New Member
- Joined
- May 27, 2017
- Messages
- 7
- Reaction score
- 0
- Points
- 1
- Age
- 40
- Location
- South Australia
- Members Ride
- VP Berlina LX
Hi all
Speedo and odo stopped working at the same time on VP level 3 dash with trip computer.
I visually inspected speed sensor and found the wires brittle and cracking and barely connected by a couple of strands - so I replaced that with a new sensor before going any further with the issue.
The new VSS didn't solve the issue though, I still have no speedo. And I have now also noticed that my fuel usage instant and average displays are not working either. (I cannot say if these stopped working at the same time, however they definetely did use to work.)
I'm note sure where to check next. Does someone have workshop guides for diagnosing this issue?
Thanks
Speedo and odo stopped working at the same time on VP level 3 dash with trip computer.
I visually inspected speed sensor and found the wires brittle and cracking and barely connected by a couple of strands - so I replaced that with a new sensor before going any further with the issue.
The new VSS didn't solve the issue though, I still have no speedo. And I have now also noticed that my fuel usage instant and average displays are not working either. (I cannot say if these stopped working at the same time, however they definetely did use to work.)
I'm note sure where to check next. Does someone have workshop guides for diagnosing this issue?
Thanks