VR 3.8 Not starting just cranking

[tay187]

I have a vr wagon 3.8 just not starting at all just cranks. It was running and starting fine till the dfi module **** itself, have checked to see if it’s getting spark and YES getting a good spark have also checked to see if it’s getting fuel YES have checked for codes and only getting code 12 which is all good? Not sure what is going on!!



ANY HELP WOULD BE APPRECIATED!!

 

[Phillbert]

Whining due to battery going flat prob.
You changed the DFI for a new one right?

 

[tay187]

Whinging due to battery going flat prob.
You changed the DFI for a new one right?

Nah I had a jump starter on it and won’t crank just whines you know?

Yeah I have brand new one on it bro

 

[grey_hawk]

Could be the solenoid not throwing in.
You could try whacking the solenoid with something but if that doesn't work you may need a new starter.

 

[tay187]

Could be the solenoid not throwing in.
You could try whacking the solenoid with something but if that doesn't work you may need a new starter.

Hey mate thanks for the advice have fitted new starter but still having the no start issue thinking it may be MAP sensor issue? But idk

 

[grey_hawk]

MAP sensor would more than likely affect it when it's running.
Can you pin point the whine?

 

[tay187]

MAP sensor would more than likely affect it when it's running.
Can you pin point the whine?

Whine has stopped from replacing starter motor but still not starting