D
Damian_w42
Guest
im wanting to no if the side moldings r dub tape't or have pin's going into the body??? and do the audio Wires run down the right? or left coz i want to run my amp down 1 but not on top of the audio Wires????????
Welcome to Just Commodores, a site specifically designed for all people who share the same passion as yourself.
markovr
Well-Known Member
- Joined
- Nov 23, 2003
- Messages
- 3,072
- Reaction score
- 252
- Points
- 83
- Age
- 62
- Location
- northside brisbane
- Website
- youtu.be
- Members Ride
- 07vessv 94vr .04vz wgn,93vp wgn,82 vhV6 wgn 88 vn
I ran a thin bit of double sidded 6-8mm tape down the upper part ot the strip and a bead of sikaflex down the middle in the cavity of the strip .The tape holds the strip to the panel until the sikaflex drys.
As long as the panel doesn't have any grease etc the sikaflex will hold it on forever after it drys properly.
There are no studs clips etc
The factory wires should run down the right hand side but there is nothing stopping you running them down any side you choose.
As long as the panel doesn't have any grease etc the sikaflex will hold it on forever after it drys properly.
There are no studs clips etc
The factory wires should run down the right hand side but there is nothing stopping you running them down any side you choose.