azzaholic
New Member
- Joined
- May 29, 2011
- Messages
- 64
- Reaction score
- 0
- Points
- 0
- Location
- Victoria
- Members Ride
- VT Commodore S1
For those who have troubles after there wires were cut before installation instead of getting the appropriate leads to wire properly here is the diagram link:
http://www.justcommodores.com.au/temp/wiring.htm
I also had to piggyback the accessories and constant 12volt to get the accessories to work but now have no problem with it working at all.
I hope this helps all with this problem
http://www.justcommodores.com.au/temp/wiring.htm
I also had to piggyback the accessories and constant 12volt to get the accessories to work but now have no problem with it working at all.
I hope this helps all with this problem