Vr V6 Engine Swap Into Mazda B2200

[Krystathrall]

Hi there, i am currently swapping a vr v6 into my b2200 ute, i have the engine loom and just recently brought a cluster loom and found that they don't directly connect (which i thought they would), so im either looking to know what bit of wiring i need or a wiring diagram so i can join the looms together if possible.

Cheers

 

[woteva]

Engine loom plugs into ecu.
What part of the vr vr dash loom do you have ?

 

[Krystathrall]

Engine loom plugs into ecu.
What part of the vr vr dash loom do you have ?

Just the one that plugs into the back of the cluster

 

[woteva]

You have an ecu with security disabled ?
What trans are you using ?

 

[Krystathrall]

You have an ecu with security disabled ?
What trans are you using ?

T5 manual, but I have the auto loom, and no security is not disabled, I was looking at buying one of these: https://rover.ebay.com/rover/0/0/0?mpre=https://www.ebay.com.au/ulk/itm/362550443949

Because it's about $100 cheaper than getting someone to disable the security on my ecu.

 

[losh1971]

A VATS disabled memcal is under $200.

 

[woteva]

With VATS/security disabled, you won't need a BCM and keyhead.

 

[Krystathrall]

A VATS disabled memcal is under $200.

In New Zealand?

 

[losh1971]

Yep there are JC members in NZ who can do this for you or get one to you. Mace Engineering might deliver to NZ.

 

[Krystathrall]

Yep there are JC members in NZ who can do this for you or get one to you. Mace Engineering might deliver to NZ.

Yeah they do post here, I've brought a thermostat from them, I don't know why i didn't think about that before haha, do I just ask if they can send me one with VATS disabled?