Welcome to Just Commodores, a site specifically designed for all people who share the same passion as yourself.

New Posts Contact us

Just Commodores Forum Community

It takes just a moment to join our fantastic community

Register

VS acclaim needs a cd player

H

hendrickavic

Guest
Yes there is, and if you havnt done it before i recomend that you get a pro to do it.

Cheers, Nath
 

gumbs

Spoon?
Joined
Jan 2, 2005
Messages
148
Reaction score
1
Points
0
Age
37
Location
UQ st lucia
Members Ride
Jap Crap dreaming of an LS1
or just search for one of the tutorials. If your half good at this sort of stuff you shouldn't have a problem.
 
H

hendrickavic

Guest
yeh but u have to be carefull of a couple of things. i sugest get someone who knows what there doing to do it.

Cheers, Nath
 

KAL SPL

Member
Joined
Jan 20, 2005
Messages
603
Reaction score
6
Points
18
Age
46
Location
Orange Nsw
Website
www.cardomain.com
Members Ride
Blown VS Calais !!
disconnect heater control rod next to where your left ankle would sit on drivers side , little
white clip on swing arm
drop panel below steering column ,3 clips twist 90 degrees
3 screws down driver side of dash facia
drop glove box 1 clip in box at rear right , slide clip out towards passenger side
3 screws down passenger side of dash facia
remove ashtray
remove panel around shifter clipped in only and slide back
3 screws along bottom of center facia panel
unclip facia panel carefully
Unplug the LED for immobiliser (this sux)
4 screw hold dash facia and 1 in AC controls
2 plugs in rear of AC controls + 1 hose cluster
undo 2 Large chrome screws going straight down and console will drop
remove dash facia
2 screws holding deck in

Orange = constant 12V
yellow = accesories
Black = earth
Brown/white = illumination
yellow/red = elec aerial
dark green & light green = front right (DG-)
tan & grey = front left (G-)
dark/black & blue red = rear right (DB-)
brown/black & yellow/blue = rear left (YB-)

There is 3 screws holding the brackets to the deck , if you drill a new hole
between the 2 screws that are towards the front of the bracket it will line
up with most after market decks and will screw straight in and look stock again.
421452_280_full.jpg
 
Top