VS Senator rear bar sagging

[Scruba]

Hi all. I searched and found nothing. If I missed something apologies.

My '96 Senator rear bar is sagging under the tail lights in the corners due to the flimsy little supports attached to the body. Anyone got a solution to fix it for good?

 

[_R_J_K_]

You would need some pretty strong glue (something like !-bond probably), but looking at previous repairs some shops have done, running a strip of metal along the edge of the bumper I always though might make a difference.

 

[KAL SPL]

If you know someone with a panel shop ask if they can run your car through a bake cycle and put a jack under the sides so it sits up where you want it then let it cool over night.
Could do it yourself with a heat gun but won't be as effective , booth will heat it evenly and not damage paint.

 

[shanhsv]

Try putting it back on that metal tab then readjust it. See if you push/pull it forward more and tighten the screws at the front