Welcome to Just Commodores, a site specifically designed for all people who share the same passion as yourself.

New Posts Contact us

Just Commodores Forum Community

It takes just a moment to join our fantastic community

Register

vt senator signature manual

canabl

New Member
Joined
Sep 8, 2008
Messages
33
Reaction score
0
Points
0
Location
st clair NSW
Members Ride
VR/II 5L UTE
little rough

Iain, The car is just covered in wash marks from the automated lazy wash machines, a few dints here and there and the drivers side skirts is cracked at the front from where the tyre guy put it up on the hoist.
The drivers seat has damage to the bolster on the top section from years of getting in and out. The gear knob leather is tattered around the badge at the top and all over the leather is a little dry and cracking in areas. Going to take to a trimmer soon to have it restored to original new condition, the car will be chopped and buffed next weekend and possibly have the skirt and roof painted, (bird dropping damage to roof) and then decide on some plates for the car.
 

hwy747

New Member
Joined
Mar 28, 2009
Messages
183
Reaction score
1
Points
0
Location
South-west Sydney NSW
Members Ride
VXII Berlina 5.7L / VW Golf GTi
Iain, The car is just covered in wash marks from the automated lazy wash machines, a few dints here and there and the drivers side skirts is cracked at the front from where the tyre guy put it up on the hoist.
The drivers seat has damage to the bolster on the top section from years of getting in and out. The gear knob leather is tattered around the badge at the top and all over the leather is a little dry and cracking in areas. Going to take to a trimmer soon to have it restored to original new condition, the car will be chopped and buffed next weekend and possibly have the skirt and roof painted, (bird dropping damage to roof) and then decide on some plates for the car.

Sounds like there is big plans already!! Looking forward to the photos!!:wax:
 

TMM

OEM+
Joined
Jun 10, 2008
Messages
877
Reaction score
8
Points
18
Location
VIC
Members Ride
VY Berlina S2
Nice car. I think the wheels are tasteful.
 

canabl

New Member
Joined
Sep 8, 2008
Messages
33
Reaction score
0
Points
0
Location
st clair NSW
Members Ride
VR/II 5L UTE
cleaning up starts

after a small operation on thursday, had some energy up today to start on cleaning up the senator.
started with giving it a good kero wash to strip off all the old polish and crap on the car. only now can you see all the small scratches and chips it has copped over its life.
left that area now for the professionals to buff and repair as much as we can on the paintwork side.
gave the carpets a good clean along with the leather. just applied some leather protection that we sell through work and some vinyl protection too. inside looks really great now just some spots of seats have some hard wear.
really have to get some nice wheels, the centre caps missing do not help either.
IMG00030-20090711-1652.jpg

IMG00031-20090711-1653.jpg

IMG00032-20090711-1653.jpg

IMG00036-20090711-1654.jpg

IMG00034-20090711-1654.jpg
 

canabl

New Member
Joined
Sep 8, 2008
Messages
33
Reaction score
0
Points
0
Location
st clair NSW
Members Ride
VR/II 5L UTE
weekends work

Well istarted saturday at 5am stripping some parts of the car prepairing to have it chopped and buffed, tinted and to make a start on the stereo.
After a weekend of work i am absolutely blown away at the transformation of a good buff to remove the not so deep scratches and bring up the shine to show off the green metallic and blue pearl effect of the paint. Unfortunately it also brings out all small dents and scratches and shows the age of the car, but short of the respray this is the best she will look for now.
I had some FUSION powerplant two ways for the rear doors and some powerplant splits of the same series for the front that i have fitted in the factory locals. For the moment the Maestro amped stock head unit is running them until my new pioneer AVIC HD3 turns up. Thinking of keeping the 8s in the shelf and replacing with a greater quality unit, or may just go all out with a full fibreglass boot install. I have got FUSION Jonah series subs of all sizes laying around and mono block, 4 channel amps to run setup.
Brother in law wanted a change of rims so swapped out my MOMO rims for his ROH 18's and i tell u what, they suit the new look of the car perfectly.
Here are some shots of the progress.
Fronts
IMG00048-20090718-1521.jpg

IMG00045-20090718-1501.jpg

IMG00046-20090718-1501.jpg

IMG00050-20090718-1524.jpg

IMG00049-20090718-1524.jpg

IMG00052-20090718-1652.jpg

Rears
IMG00044-20090718-1501.jpg

IMG00045-20090718-1501.jpg

IMG00051-20090718-1537.jpg

Rims and newly rectified paintwork
103_2384.jpg

103_2388.jpg

103_2390.jpg
 

STEALTHY™

So Wet For You!
Joined
Jan 3, 2005
Messages
6,630
Reaction score
83
Points
48
Location
SA - The Roadworks State
Members Ride
VP Calais International, FPV, Audi
Those rims killed it. Stock (optional) 10 spokers would have done the trick.


Is it a 5 or 6 speed? Always wondered what the holden strokers in the VT range were fitted with.
 

canabl

New Member
Joined
Sep 8, 2008
Messages
33
Reaction score
0
Points
0
Location
st clair NSW
Members Ride
VR/II 5L UTE
My senator has a 5 speed behind it.
The rims were for free and got a set of VT GTS rims awaiting track tyres.
Would love to lower it a whole heap but already got dramas getting up driveway at home and work.
 

GOTMYN

Stab it and Steer...
Joined
Sep 2, 2006
Messages
547
Reaction score
7
Points
0
Location
Mornington, Vic
Members Ride
Whippled 5.7, VE SV6, GU Patrol 3.0DI
Hey, Nice ride mate, Love it in Blue!!
Gotta love the Manual :)
 

canabl

New Member
Joined
Sep 8, 2008
Messages
33
Reaction score
0
Points
0
Location
st clair NSW
Members Ride
VR/II 5L UTE
new plates arrived

well after a short decision period and a 2 week wait, the new plates have arrived.
Could not decide on either my old CANABL, SIG177 or SIG98R, but ended up going with
IMG00064-20090821-1711.jpg

IMG00063-20090821-1711.jpg
 
Top