VT SS FOGLIGHTS

[Diniboi441]

hey guys need some help how do you replace the globes of VT SS foglights?
Do I have to take the front bumper off and or can I do it from the front ? But I noticed there’s this plastic cover with one screw at the front but it doesn’t come off either as it’s attached to something else at the back.

would appreciate if anyone can help thanks

 

[RiffRaffMama]

Try these out:

 

[Diniboi441]

Hey mate is that specifically for the VT as I know from VX to VZ is pretty easy to do it under the car behind the bumpers I have done before like what the first diagram says but VT’s locations of screws are pretty hard to reach as VT got the square shape fog lamps and VX-VZ got the round ones

 

[Diniboi441]

.

 

[RiffRaffMama]

Those instructions are copied exactly from the VT/VX/VY manual I have, so I would have expected it was for all flavours, but I have a couple of manuals from different publishers so I'll take a look at those and see if they differ if you like.

 

[Diniboi441]

Those instructions are copied exactly from the VT/VX/VY manual I have, so I would have expected it was for all flavours, but I have a couple of manuals from different publishers so I'll take a look at those and see if they differ if you like.

Thanks mate

 

[RiffRaffMama]

Ok, so the Ellery's manual is where the original instructions I gave you were from. The Charmantus manual had nothing at all about the fog lights. But the Holden Dealer's Service manual had quite comprehensive instructions . I've pdf'd them for you.

Remember me when you're naming your first born child .

 

[Diniboi441]

Ok, so the Ellery's manual is where the original instructions I gave you were from. The Charmantus manual had nothing at all about the fog lights. But the Holden Dealer's Service manual had quite comprehensive instructions . I've pdf'd them for you.

Remember me when you're naming your first born child .

Hahaha sure do mate
Thank you very much for your efforts really appreciate it.