MACE
Well-Known Member
- Joined
- Mar 30, 2008
- Messages
- 3,187
- Reaction score
- 102
- Points
- 63
Now I'm looking at cams now if u get stage 2 cam will I also need to get new pushrod and springs or is it just recommend
Also wat rocker should I get to suit stage 2 cam or should I get cam to suit rockers
Hey large,
The bare requirements for the stage 2 COMP CAM, would just be the cam and computer reprogramming itself.
For a more quality install I would recommend the following
Stage 2 COMP CAM and tune
Valve springs 105#
Retainers to suit
Shorter valve stem seals
Inlet manifold gaskets
Double row timing chain
Oil pump cover (for chain clearance)
Can go a 1.75:1 ratio rocker, which we can supply for the job if you wanted more from the cam
If you have any more questions please don't hesitate to ask.
Cheers,
Steve