vu s pack ute

[MACE]

Now I'm looking at cams now if u get stage 2 cam will I also need to get new pushrod and springs or is it just recommend

Also wat rocker should I get to suit stage 2 cam or should I get cam to suit rockers

Hey large,

The bare requirements for the stage 2 COMP CAM, would just be the cam and computer reprogramming itself.

For a more quality install I would recommend the following

Stage 2 COMP CAM and tune
Valve springs 105#
Retainers to suit
Shorter valve stem seals
Inlet manifold gaskets
Double row timing chain
Oil pump cover (for chain clearance)

Can go a 1.75:1 ratio rocker, which we can supply for the job if you wanted more from the cam

If you have any more questions please don't hesitate to ask.

Cheers,
Steve

 

[large]

So wat am I looking at for cam and recommend parts without the rockers

 

[MACE]

For a quality install I would recommend the following

Stage 2 COMP CAM and tune
Valve springs 105#
Retainers to suit
Shorter valve stem seals
Inlet manifold gaskets
Double row timing chain
Oil pump cover (for chain clearance)

If you have any more questions please don't hesitate to ask.

Cheers,
Steve

 

[large]

Cnt wait for my parts to arrive

 

[MACE]

They should be there shortly

Cheers
Steve

 

[large]

Yippe parts arrived today just as described will be putting on nxt wknd cnt wait to feel the result

 

[large]

Hey Steve just curious would these products be able to be painted in high temp paint off course and sand bck the surface area or beta leaving alone

 

[MACE]

They can be painted if you wished using quality automotive paint provided you prep the surface first.

Cheers
Steve

 

[large]

Thanks mace love the product even though lol I got nice fine from wat ure product produced down low ay top job

A+ product

 

[MACE]

Not a worry large, glad to hear your happy

On the fine note please take it easy out there.

Best Regards,
Steve