Welcome to Just Commodores, a site specifically designed for all people who share the same passion as yourself.
vx 5 speed v6 in vn
- Thread starter flynn84
- Start date
mws
New Member
- Joined
- Sep 25, 2007
- Messages
- 278
- Reaction score
- 1
- Points
- 0
- Location
- central coast
- Members Ride
- vn ss
if your planin on using a T5 it will be fine but as far as im aware thats the getrag box in the vx and that i have no experience with, i think it does fit up but dont quote me on that
azkwazere
Ahhh Yes, Ahhh Yes....
- Joined
- May 30, 2005
- Messages
- 1,813
- Reaction score
- 39
- Points
- 0
- Age
- 36
- Location
- .....SE Burbs
- Members Ride
- VP 5-SPD / 24-SPD Racer Hybrid
i think he's using the whole engine, then yeah.. itll fit, but, the getrag box sucks, use the T5, pretty sure you can bolt it up, that way you dont kneed to worry about hydrolic clutches!
The engine and box combo will fit fine... just need to do the conversion...
as for just the box swap, BW T5 is better than getrag, no point converting.
aZk.
The engine and box combo will fit fine... just need to do the conversion...
as for just the box swap, BW T5 is better than getrag, no point converting.
aZk.
chaos 8
New Member
- Joined
- May 8, 2008
- Messages
- 49
- Reaction score
- 0
- Points
- 0
- Age
- 40
- Location
- Coffs Harbour
- Members Ride
- VS 420hp 355 5spd
it will all bolt up fine! you will just have to chase down a vs manual pedal box that suits hyd clutch! use your original vn ecu and harness remove air flow meter and run map sensor and get your memcal re tuned to suit ecotec (they run heaps better) you will need to modify the vn harness slightly (alternator etc.) and swap speed sensors over. ive just finished putting a vt ecotec and 5spd into a vp! and it hammers!