VX Berlina wont start

[holdencple]

i wouldnt worry about the leads and plugs its more likely to be your coil pack and DFi module.
or could be the crank angle sensor like wana s' charge stock vt said.
mate had the same problem with coil pack,parked it up overnight then wouldnt start the next day

 

[accentstencil]

not sure if you know or not but it says 46 is your crank angle sensor(which would explain y it's not starting)

and say's 75's auto related


don't hold me too it , its just what the book say's

This is correct. It does sound like the Crank Angle Sensor. Check the plug and wiring at the CAS.

 

[secret_id]

Thanks guys, this one has been a headach, will let yous know how i get on

 

[accentstencil]

I added an attachment to my last post after I replied, you might not have seen it.

 

[secret_id]

I added an attachment to my last post after I replied, you might not have seen it.

Thanks for that, big help

 

[don0xer]

one trick i was told was to pour some water around the CAS area, not sure as to why it actually worsk but it did help start my car a few times until i actually got around to fixing the CAS lol

 

[secret_id]

UPDATE......... Changed coil pack, new crank angle sensor, still wont fire........

Powertrain light stays on when try to start.............. Had just spent over $200 and still no result........

What next......

 

[secret_id]

Just after i put the last post on, i went back out to the car kicked it and then she decided to start, not to sure if crank angle sensor needed to be regonized cos i swapped a relay over again and thats when it started, but to double check i put the relays back to where they came from and car staring first pop........................ Thanks all for your help