Welcome to Just Commodores, a site specifically designed for all people who share the same passion as yourself.

New Posts Contact us

Just Commodores Forum Community

It takes just a moment to join our fantastic community

Register

VY Calais window nozzle not working?

Blueglow

Member
Joined
Sep 14, 2013
Messages
37
Reaction score
0
Points
6
Location
Geelong
Members Ride
WH Statesman
Just bought a VY II supercharged calais and loving it. Noticed that the right window nozzle just won't shoot out water at all.
Not sure if its blocked or if the hoses are playing up, tried to follow the hoses but they seem to disappear into the car and seems like a lot of effort just to check on them.

Anyone got any advice or tips on what I should do to get it working again?
 

Blueglow

Member
Joined
Sep 14, 2013
Messages
37
Reaction score
0
Points
6
Location
Geelong
Members Ride
WH Statesman
I put one of my guitar strings I had lying around into the holes and wiggled it around and to no success.
 

Nut Kracker

Donating Member
Joined
Oct 18, 2012
Messages
4,760
Reaction score
151
Points
63
Age
64
Location
Echuca Vic.
Members Ride
VT SS 304ci (195i)
There should be a T piece located behind the bonnet insulation.
If the other nozzle is OK, I'd say it's at the T or after it.

Pull the hose off at the nozzle and give it a squirt. If water comes out, then it's the nozzle.
If not, then the hose will be blocked some where between the nozzle and the T piece.

The nozzle is held in place by a clip, accessible from under the bonnet.
Not hard to remove. Give it a clean from the hose side as well.
 
Top