Nikkojoe
Member
- Joined
- May 14, 2004
- Messages
- 344
- Reaction score
- 2
- Points
- 18
- Location
- Perth
- Members Ride
- AE86, VE M6 UTE, Toyota 86
RichardW said:Cheers where is the CAS?
The cas (crank angle sensor) is located at the crankshaft pulley. It should be a black plastic thing with a wire going to it that slips behind the crankshaft pulley (the large bottom one, aka harmonic balancer).
Basically just get a container of water holding it at the water pump pulley height, then pour it over the harmonic balancer directing the water to the passenger side of the balancer...
should get it that way.
If the car start first shot after doing that, cas needs to be changed. Not sure how much they cost though.....