VY Indicator

[schoey3]

hey guys,

my Front right indicator, is stuffing up i have changed the globe and its still not working, the indicator is blinking fast which, means wiring fault or blown globe.

Any Suggestions of what i can do.

Thanks from,
Schoey3

 

[Jezza]

is the globe the correct watts and volts as the old one because if its less then that could cause it to flash fast

 

[Blazed1101]

Check your ground that generally is the problem, also if that doesn't work try putting an led globe with a resistor on it. they would be the first things I look at

 

[schoey3]

nah i put a brand new globe in that was the exact same as the one that was in there.

it will be a wiring fault does anyone know how i am able to fix that or where the front right indicator wires go so i can test them?

 

[colgf]

do you have a towbar plug?? sometimes a loose wire in that causes the blinkers to go haywire, or a blown globe on the side that is flashing fast....

 

[schoey3]

nope no towbar plugs do you think it could be the wiring loom?

 

[VYHDT]

whack a multi meter on it.. if in the end its stuffed.. parallel of the headlight indicator circuit

 

[schoey3]

aiight.. you reakon i can pick one from the wreckers?

 

[schoey3]

bump......

 

[Sean880]

nah i put a brand new globe in that was the exact same as the one that was in there.

it will be a wiring fault does anyone know how i am able to fix that or where the front right indicator wires go so i can test them?

What was the wattage of the new globe you installed?