Welcome to Just Commodores, a site specifically designed for all people who share the same passion as yourself.

New Posts Contact us

Just Commodores Forum Community

It takes just a moment to join our fantastic community

Register

VZ 1/4 mile times

richardpalinkas

Blown Alloytec
Joined
May 4, 2009
Messages
2,290
Reaction score
16
Points
38
Location
Gold Coast
Members Ride
Raptor Impulse VZ SV6
hey, i know there have been a few threads about 1/4 mile times for the alloytecs, but they are all dead and had not too much information within them, but if anyone has taken their vz down the 1/4, post up your times as such:

60' -
ET -
MPH -
Mods-


il go first.

60' = 2.296
ET = 15.256
MPH = 93.19
Mods = mace manifold spacer, twin 2.5 catback exhaust, Executive intake pipe

will be going to willowbank tomorrow night, as i have a new diff, and im hoping to bring it into the 14's as an untuned alloytec
 

frank6969

New Member
Joined
Feb 28, 2009
Messages
19
Reaction score
0
Points
0
Location
warragul
Members Ride
VZ executive
I know your after times and that here but just curious how the spacer goes in your car Is it a worthwhile mod? I have a full 2.5" system with pacemaker extractors on my car and the spacer was going to be my next improvement I just curious ob the gains
 

richardpalinkas

Blown Alloytec
Joined
May 4, 2009
Messages
2,290
Reaction score
16
Points
38
Location
Gold Coast
Members Ride
Raptor Impulse VZ SV6
well, my best before was a 15.3 without spacer in October last year, so i guess it took off .1 down the 1/4. there is a noticable gain at takeoff and in the very lower rpm. i bought them for cheap though, thats why i have them haha
 

Brenah

New Member
Joined
Apr 1, 2009
Messages
130
Reaction score
1
Points
0
Location
Manly, NSW
Members Ride
VZ Exec Wagon
Have you done the 2 hole mod Richard?
I'd be interested to see the difference in times with and with out.

Brendan
 

richardpalinkas

Blown Alloytec
Joined
May 4, 2009
Messages
2,290
Reaction score
16
Points
38
Location
Gold Coast
Members Ride
Raptor Impulse VZ SV6
Ah yes I have done the 2 hole mod, and personal experience with it compared to a pod down the 1/4 was a loss of .3 with the pod, they're useless
 

CORNYY

New Member
Joined
May 24, 2011
Messages
35
Reaction score
2
Points
0
Location
Victoria
Members Ride
Holden VZ
Ah yes I have done the 2 hole mod, and personal experience with it compared to a pod down the 1/4 was a loss of .3 with the pod, they're useless

Which did you find useless the two hole mod or the pod?
 

Brenah

New Member
Joined
Apr 1, 2009
Messages
130
Reaction score
1
Points
0
Location
Manly, NSW
Members Ride
VZ Exec Wagon
Id say Pod. "With a loss of .3 with the pod"

Iv'e heard that a pod does sweet F all
 

HoldenOnn

Roll Cage Territory
Joined
May 26, 2009
Messages
548
Reaction score
7
Points
18
Location
Busselton, WA
Members Ride
VY Calais Series 2 HBD V6 Sedan 2004
2004 VZ Calais 5sp Auto - V6 Alloytec190

60' = 2.352
ET = 15.339
MPH = 92.02
Mods = No Modifications.....100% Stock
 

Attachments

  • SCAN0060.jpg
    SCAN0060.jpg
    73.6 KB · Views: 578

richardpalinkas

Blown Alloytec
Joined
May 4, 2009
Messages
2,290
Reaction score
16
Points
38
Location
Gold Coast
Members Ride
Raptor Impulse VZ SV6
took the car out and while humidity was fairly high, pulled a 15.136 @ 92.43MPH with a 60' of 2.236.

when the humidity is not so high, and doesnt look like its going to rain for the following days after drags, will go out there to retest the gears, as it seemed fairly slow. there wasnt much traffic out there, so it looks like the pros knew when to not go out haha.
 
Top