Just Commodores Forum Community

It takes just a moment to join our fantastic community

Register

vz alloytec adjuster pulley?

Discussion in 'VZ Holden Commodore (2004 - 2006)' started by sleek_vp, Apr 17, 2009.

  1. sleek_vp

    sleek_vp sleek_vp

    Messages:
    93
    Likes Received:
    4
    Trophy Points:
    8
    Joined:
    Mar 11, 2007
    Location:
    brisbane
    Members Ride:
    VS ute
    id like to know whick pulley it is?, how do you adjust it to tension the belt? and how do you remove it? cheers for all advice
     
  2. andyman

    andyman The Only 6sp VZ Wagon

    Messages:
    3,783
    Likes Received:
    55
    Trophy Points:
    36
    Joined:
    Mar 29, 2005
    Location:
    Orange, NSW
    Members Ride:
    2012 BT50 4x4, 84 Hilux 4x4 & 05 Husky TE450
    they have a variable adjustment pulley, so in other wors it has a strong internal spring on the inside of the pulley that tensions the belt,

    to remove it, see the pully roughly in the middle and towards the passengers side of the motor, it was a hole where you can place a 3/8 or 1/2 inch bar, insert one the and push in the direction so the belts get slack, then just slip it off,

    make sure you draw up a mud map of the belt direction
     
  3. sleek_vp

    sleek_vp sleek_vp

    Messages:
    93
    Likes Received:
    4
    Trophy Points:
    8
    Joined:
    Mar 11, 2007
    Location:
    brisbane
    Members Ride:
    VS ute
    thanks mate for the info, the first time i atempted it i thought it might be the same setup as the vn-vy v6
     

Share This Page