VZ LS1 accelerator pedal solution

[Fu Manchu]

How good is this!
Use a 6ltr or V6 accelerator pedal on the VZ LS1 drive by wire system.
https://www.ultimateconversionwiring.com.au/store/vz-ls1-57l-fbw-pedal-module

$350.

Better than the $1000-$1500 price tag on a used one!

 

[Fu Manchu]

Of note, this also allows a VE or VF pedal to be used if the adaptor harness plugs are changed to suit.

 

[yamahahatim]

I'm in.
Ordered.

 

[vsl67]

I just put my pedal interface module in my VZ SS Ls1 and converted an old non working Ls1 pedal to V6 by swapping the plug with the chip so I could keep my alloy pedal and took it for a run it ran beautifully just want to add my Ls1 SS runs an X link with a VF throttle body ,But I do have a brand new VZ Ls1 Throttle body in box in case the X link ever malfunctions

 

[vsl67]

also you can get brand New Ls1 tb from Ebay for $388 https://www.ebay.com.au/itm/272551180677 and Recos exchange for $817https://www.ebay.com.au/itm/1534543...cXrliDTKElT/iYRadPrz9SPQ==|tkp:Bk9SR-qalv6hYg

 

[2_stroke]

Thank you so much for sharing what about throttle controller with it used to adjust sensitivity??? Great find might still go cable though will think this through

 

[Fu Manchu]

The throttle controller is not going to need changing. You just change the peddle. Plug in the adaptor from the first post. Sorted. Nothing more to it.

If you put a cable throttle in, you’ll have the headache of disabling the the rest of the network which will be looking for data signals from modules not sending.