What engines will fit into my Holden Berlina VE 2007?

[JadeM95]

Hi guys
I have a hole in the back of the block of my motor so I am told I going to need to replace it.
Just wondering what Holden motors will fit into the engine bay of a Holden 2007 berlina VE. It currently has a 10HBE motor but they are hard to source in WA so hoping something like a 10HBN would fit easily?

Thanks

 

[markalan1two]

all of them!

 

[Aussie Willy]

L77 $6000, that is all you need to know.

 

[Nfsve]

LEO is the engine you are after, 10HBE doesnt mean much to most people. Same as Omega, should be easy to find. Just use your original coil packs etc..

 

[Nfsve]

The Premium Engine (195 kw) in SV6 and Calais was LY7 designation.

 

[Nfsve]

Holden Commodore Engine 3 6 VE LEO Type V6 08 06 08 09 85 032KMS | eBay


Looks like the back of the cylinder head is where the LEO sticker is, also check the engine number stamping on the back / side webbing of the block... good luck.

 

[exmec]

is the engine leaking water, it may just be a welsh.(expansion plug )which is at the rear of the motor. usually on the sides but remember this engine is an american design which runs east west in their vehicles and is easy access not at the rear because we run in line.not an easy job to replace. ask a mechanic that worked on 48-215 or FJ holdens.