EYY
Well-Known Member
- Joined
- Mar 6, 2011
- Messages
- 5,754
- Reaction score
- 2,036
- Points
- 113
- Location
- Vic
- Members Ride
- VS Statesman
Looks like you’re spraying it pretty dry. On the final coat, hold the gun back from the job about 30-40cm and mist it over the panel. This ensures that the metallic flake lands naturally and gives an even appearance.
Clear 15-20 mins after final colour coat. Two light-med coats of clear to ensure the base doesn’t run. Then another couple of med-wet coats. Just make sure you put enough on that you can wetsand and polish later on.
Clear 15-20 mins after final colour coat. Two light-med coats of clear to ensure the base doesn’t run. Then another couple of med-wet coats. Just make sure you put enough on that you can wetsand and polish later on.