Why oh why won't they stick ?

[STEALTHY™]

Just use water on the see through ones.

Your trouble might be that you havn't removed the 'clear' cover that comes on them, and is really hard to see.

 

[Turd Ferguson]

you guys are lucky, your allowed to have them inside you car...

 

[LightningVP]

I taped mine with 3M non marking clear tape...That way when I take them off the window isn't sticky or anything...

 

[Morton]

Haha, when I got my Ps in NSW, I wasn't aware of the "outside the window" rule, and proceeded (being fresh from VIC) to modify my plastic p-plates to accept suction caps, and fit them inside my windows anyway. In hindsight, I was lucky not to get picked up for it

 

[LightningVP]

the suction cap ones are ok but if you want them to look good then you may prefer the see through ones


i dont think ive seen the green P's with a suction cap yet

They do come Red/Green suction now, got a pack in case I need another set of Ps

 

[Morton]

I bought a green suction cap set for a friend about a month ago

 

[Nevyn]

like Stealthy said.....take the clear plastic film off them....me son was having the same problem till I found the film :bang:

 

[Philthy]

Someone drove past me the other day who had just glued the green ones to the front of their red suction-cap ones.
I always see people with their green ones stuck on with heaps of sticky tape as well.
Someone else I know managed to find some green suction cap ones, but they fall down more often than the see through ones.

My vicroads green ones have been ok so far as I haven't had to take them off yet. But I'm sure as soon as I do they will lose their 'stick'

 

[rpurser]

took me a month to see there was a very thin very clear plastic film on my old ones, soak them in water and rub with two fingers on both sides, if there is any it'll move and you'll get it off. there not permitted in NSW, so if u want i'll send my old ones down. just pm your address and they're yours (only have two, green p on white background), just slightly wet before applying and keep the pressure on for 15 seconds and they stick usually

 

[VZHSV]

vic roads p plates suck they have left the crappy glu on my windows and it aint comming off! ****ing gay .

picked up a new set from BP servo station that stick perfect