Just Commodores Forum Community

It takes just a moment to join our fantastic community

Register

Will the Air Flow Meter from a VL work on a EI VK

Discussion in 'Straight 6 Development And Modification' started by 202injected, Oct 4, 2005.

  1. 202injected

    202injected Quality Engine Builder

    Messages:
    51
    Likes Received:
    0
    Trophy Points:
    0
    Joined:
    Oct 4, 2005
    Location:
    Townsville
    Members Ride:
    VZ Exec. 3.6
    I am looking for a way to replace the unreliable old vane AFM in the VK, and was wondering if the VL hot wire style will work on the VK compter. The VL unit fits and all the wiring is somewhat similar, (the plug is th same, both being bosch products). I just want otherpeoples opinions/experience before i fire up the engine.
    cheers
     
  2. flow=go

    flow=go Guest

    no vl air flow meter wont work on standard vk computer
     
  3. 202injected

    202injected Quality Engine Builder

    Messages:
    51
    Likes Received:
    0
    Trophy Points:
    0
    Joined:
    Oct 4, 2005
    Location:
    Townsville
    Members Ride:
    VZ Exec. 3.6
    well i better pull it off then

    thanks
     
  4. Rock_Lobster

    Rock_Lobster New Member

    Messages:
    3
    Likes Received:
    0
    Trophy Points:
    0
    Joined:
    Oct 7, 2005
    Location:
    Newborough, Vic
    Members Ride:
    VY SS A4 WAGON, EH UTE
    Megasquirt it !!!!!

    Check out this site :- http://www.msefi.com/

    Build your own EFI computer. Learn a heap about electronics, without having to be an engineer. This site has the best manual I have ever seen for a DIY site. Wire it up with a VK connector so you can swap it with the VK EFI analog unit. Then you can throw away the craptacular vane airflow meter. Megasquirt uses a MAP sensor. Wire up a commodore oxygen sensor and get better economy than the VK ever had. Once this is all done, use the Megasquirt to control spark as well.

    You know you want to. :D

    Rock Lob
     

Share This Page