verami
New Member
- Joined
- May 9, 2023
- Messages
- 4
- Reaction score
- 0
- Points
- 1
- Age
- 39
- Location
- Sydney
- Members Ride
- Vz commodore wagon 3.6
Hi everyone! Need your help to revive my old 2005 VZ wagon with LEO engine.
How things develoved: one beautiful morning it started with a bit of a delay. I drove off and realised that the brakes are not boosted! After the car warmed up, the brake boost returned, but the car started running rough and had half the power. I drove to the repair shop where they have not found the vacuum leak, so I took the car home. Next morning it didn't start at all - turning, but not igniting at all. When the car was still running, I connected the simple EBD scanner to see the codes and there was only a cam sensor position fault. The chain did rattle a bit before, but could it be the cause of running rough and no start?
How things develoved: one beautiful morning it started with a bit of a delay. I drove off and realised that the brakes are not boosted! After the car warmed up, the brake boost returned, but the car started running rough and had half the power. I drove to the repair shop where they have not found the vacuum leak, so I took the car home. Next morning it didn't start at all - turning, but not igniting at all. When the car was still running, I connected the simple EBD scanner to see the codes and there was only a cam sensor position fault. The chain did rattle a bit before, but could it be the cause of running rough and no start?