CLeMay
New Member
- Joined
- May 28, 2023
- Messages
- 10
- Reaction score
- 0
- Points
- 1
- Age
- 30
- Location
- Perth
- Members Ride
- Vz ss ute
G'day fellas
Need some help with my build I'm doing an ls1 to ls2 engine swap and I'm stuck.
My ls2 has a double row timing chain and the cam angle sensor on my timming chain cover is interfering with the chain.
It's not actually the sensor that is hitting the chain it's the bulb at the back witch houses the screw for the sensor.
I cut the bulb back to miss the chain now the cover sits flush on the block but the hole for the screw is now open on the inside of the cover.
Unfortunatly i can attach photos of my predicament.
I appreciate any help thanks.
Need some help with my build I'm doing an ls1 to ls2 engine swap and I'm stuck.
My ls2 has a double row timing chain and the cam angle sensor on my timming chain cover is interfering with the chain.
It's not actually the sensor that is hitting the chain it's the bulb at the back witch houses the screw for the sensor.
I cut the bulb back to miss the chain now the cover sits flush on the block but the hole for the screw is now open on the inside of the cover.
Unfortunatly i can attach photos of my predicament.
I appreciate any help thanks.