Harvs82
Active Member
- Joined
- Dec 29, 2005
- Messages
- 1,134
- Reaction score
- 24
- Points
- 38
- Age
- 41
- Location
- Glen Waverley VIC
- Members Ride
- MY08 Subaru Liberty GT-B & MY16 VF II SS Redline
I'm in the process of doing up my VS V6 for sale and keep having an idle issue.
Engine starts and runs fine, idles fine, but going from reverse into drive it almost stalls, or does stall. Putting load on like steering is fine, or loading up electrics is also fine, it's literally just going from R or N into D.
I've recently replaced the inlet manifold gaskets, and put a brand new Dephi idle motor in and the problem persists. It was an issue prior to doing inlet gaskets. Fully cleaned out throttle body and all associated bits, and cleaned out intake runners and plenum chamber.
Engine runs fine in every other aspect. 196000km on the car.
Engine starts and runs fine, idles fine, but going from reverse into drive it almost stalls, or does stall. Putting load on like steering is fine, or loading up electrics is also fine, it's literally just going from R or N into D.
I've recently replaced the inlet manifold gaskets, and put a brand new Dephi idle motor in and the problem persists. It was an issue prior to doing inlet gaskets. Fully cleaned out throttle body and all associated bits, and cleaned out intake runners and plenum chamber.
Engine runs fine in every other aspect. 196000km on the car.