'Frozen' Indicator

[HowMat]

Hey all, my VZ indicators started sticking and not doing the usual on/off flicker yesterday, and today they're cactus? Is it a fuse problem, or wiring, or even an electrics problem? Any help would be awesome as this is my day in day out car for everything,

cheers


Sent from my iPhone using Tapatalk - now Free

 

[Super_Low 91]

Sounds like it mite be the flasher relay or if the indicator stalk is not working properly it could also be that. My money is on the flasher relay tho

 

[Sabbath']

VZ's had a BCM issue. Do a search there are a few threads about it.

 

[HowMat]

Thanks guys!


Sent from my iPhone using Tapatalk - now Free

 

[Nut Kracker]

Don't go delving into the guts of the circuit first.
More than likely it's just the flasher unit.
Had one go on an EF falcon. No flash, just stayed on.
Had to flick the stalk on and off when I had to turn.
Easy cheap, 5 minute fix.

 

[adamcawood]

Hi mate I done mine not long ago the left was sticking bad I got the relay off eBay was like 12$ and de soldered it and the replaced with new relay took less then 1 hour where abouts are you located ?

 

[franklinfrog]

http://forums.justcommodores.com.au/vz-holden-commodore-2004-2006/154072-how-fix-sticky-indicator-vz-commodore-bcm.html

 

[HowMat]

I didn't think I had to solder and in solder a relay? RELAYS WERE SO EASY ON VS'.

where do I find the point for the indicator relay? doesn't seem to be in the fuse case under the bonnet? probably just tired from work,

thanks for the link!


VZ Lumina

 

[adamcawood]

Up under the dash above the pedals there is a bcm you need to take that out then open the case up there will be a little relay on the circut board you need to replace that

 

[HowMat]

Up under the dash above the pedals there is a bcm you need to take that out then open the case up there will be a little relay on the circut board you need to replace that

thanks!

and yes. The VS' were so much easier to replace relays!


VZ Lumina