glove box removal

[routier1642]

My plastic clips broke when I removed the glovebox.
Reinforced plastic clips are available on eBay.
So are better quality rubber stoppers.
(mine had failed earlier, which is why the clips were cracked)

 

[Tasmaniak]

sorry, seeing as you asked if it was the same as on a vz, i assumed you had done a vz before.

1. open glovebox
2. remove anything inside glovebox, or itll do it for you at step 4
3. remove 2 rubber stoppers by pushing them towards the front of the car and inwards, they just slide off.
4. open glovebox further, at this point if you forgot to remove everything, it will fall out onto the car floor.
5. pull towards you on both sides. take your time, dont be too forceful or you will break the plastic clips, but if you do they can be easily sourced from holden as said above.

Haks right. The only thing I do differently is in step 3 I shoveboth hands into box (so many lols to be had) cross them over and grab each clip and lean them out with my thumbs.

In step 5 I pull one side first and then the other.

Either method will work.