It takes just a moment to join our fantastic community
Discussion in 'Holden Commodore How-To's' started by exec24, Sep 10, 2007.
Very helpful. Is this from the FSM? Do you have the rest of it and does it cover the new alloytech?
Agreed. Bump for the source of the images?
hi fellas, tthis is a holdens worksop manual it only covers VY series not VZ
You obviously have something many of us want - a genuine VY shop manual.
My main interest is the factory wiring diagrams - those I have from the Ellery's manual aren't worth the paper they're printed on.
Is there any chance you can attach some of those? In particular, I am after Calais console and dash wiring plans and the reversing sensor setup.
Alternately, how did you come by your FSM?
I WOULD KILL FOR THIS SERVICE MANUAL!
can you share the service manual by any chance
all VY owners would be very greatful.
if you need info PM me, as i very rarely check this thread
Awesome info and pictures! Is there anything this detailed for the steering wheel controls?
AS PER REQUESTED
just read ur bit on taking out the center console. im trying to put some splits in and im having some strif taking out the two strips that run along were the dash meets the windo .
pics for removal of the upper dash vent
-sorry about the wait
another as requested
Can people Stop messaging me Regarding Copys of this manual(i Wont copy it)
I tried removing the top console yesterday and had it all prised out but there was something holding it in just in front of the shifter even though I'm sure there are no screws apart from the one right at the front by the front compartment. I had removed the rubber compartment but there was no way the console was going to lift out. I didn't want to put too much pressure on it incase it split. Are there any tips on how to get it out??
yea they take a bit of work to get out the first time. there is nothing holding it back exsept a few small clips on the inside, jst keep playing around with it pulling it in different directions an stuff, it will eventualy come out.:thumbsup:
anything on removing the covers under the steering column for the VZ? im sure this would be the same fore the VY yes?
Im trying to take out the drivers side windscreen demister cover as shown above. But i cant get the side cover off to allow me to get that screw #1 in the pic above.
drop the fuse cover under the steering column (it's only held by clips along the top, just pull it open). Remove the 3 screws as shown in post #13 and bob's your uncle :thumbsup:
A really big thanx for this much appreciated
Separate names with a comma.