Sub set up with lpg tank

[StoneX]

I'd have a corner mounted box made if space is a concern, but that isn't a cheap option.

 

[T-MaKK]

phatvtcom.
can we get them pics asap? im curious as to how much boot space you have left.

thanks!!

 

[XStatic64]

Should mount the subs INSIDE the gas tank, :thumbsup:

 

[HamaTime™]

Should mount the subs INSIDE the gas tank, :thumbsup:

bass would really boom then aye?

 

[Timmos]

This is what i have done with my subs and LPG.

It's legal as long as you leave the safty valve exposed.

2 peices of timber and 2 fibreglass boxs.. all held together by 2 screws. haha

 

[Trent1291]

Hey all,
I have a VT commy and a gas tank in the boot, and i interior designed the boot and hid the gas tank. You need to build a wall using 6mm MDF board... make sure its cut to size and allows for the boot brackets to drop down. Buy 2mtrs of carpet from Autbarn... carpet the mdf using craft glue and small tack nails around the edges. re carpet the floor to match and do what you want with your set up...

 

[JBDrifter]

Hey all,
I have a VT commy and a gas tank in the boot, and i interior designed the boot and hid the gas tank. You need to build a wall using 6mm MDF board... make sure its cut to size and allows for the boot brackets to drop down. Buy 2mtrs of carpet from Autbarn... carpet the mdf using craft glue and small tack nails around the edges. re carpet the floor to match and do what you want with your set up...

You need access to the safety valves of the gas tank... I'd recommend doing what Timmos has done and cut a hole in that mdf exposing the valve enclosure.

 

[kummo]

This is what i have done with my subs and LPG.

It's legal as long as you leave the safty valve exposed.

2 peices of timber and 2 fibreglass boxs.. all held together by 2 screws. haha

Thats Fuc$in awesome looks good where did you get that done how much did it cost.

StoneX those corner sub enclosures are very expensive.

 

[Trent1291]

lol yeh i know now... just found out the other day... sucks that I have already done it all... if i have the valve showing... my amp on the wall will need to go... and the only other place for it is for it to be out of site which i dont want.. tough choice to make. Ill probs just wait until i get a canary and then do it.

 

[Trent1291]

timmos did u take the spare wheel out to fit the amps in? if u have u can get done for un road worthy for no spare tire...