VH HOLDEN
New Member
- Joined
- May 11, 2013
- Messages
- 7
- Reaction score
- 0
- Points
- 0
- Location
- new zealand
- Members Ride
- vh commodore 1982
Hi i have a 1982 VH commy 4 speed with A 1.9cc 4 cyl starfire motor. I have been told this is like a 6 cyl but only has 2 cyls cut off diffant from the opel one.
so would it be like a 6 cyl flywheel/drive plate set up anyway?. or there maybe a 10mm diff between the 4 cyl and 6 cyl sometimes in this model.
I have got a red 186 holden motor to put in her, it is out of a auto set up..
I have a 308 diff and 6cyl shock set up and hubs already and 4 cyl 4 speed in her now. was going to put 202 but didnt happen.
I figr i have to change sump to fit VH set up in over racks and maybe crossmebers?.
the holden sumps are interchangerbale with red, blue, black holden motors just have to get a blue 6 cyl vh one and then move dipstick to other side?.
Will the 186 red motor bolt on to my 4 cyl flywheel/drive plate? or do i need to get one for red motor 6 cyl set up?, and new cluch / plate?.
Also will my 4 speed gearbox work with this 186 motor. I hope it should wire up as normal?
been trying to find all info & sort out before it starts the pulling things out to see how much this going to cost. am i missing anything eals out ??
hopeing I may not have to change much
if anyone has done this please tell/shear with me some info.
please no smart remarks just need some more info thanks as it the only motor now iv got to work with.
NZ dose not have the same rulez with emissions as OZ dose. and it is a recon 186 motor and smaller then the nomal vh 6 cyl is why i got off my mate. i know it ant going to just fit in and needs some changes with red and blue parts and hope all the parts are inter changable. I do have help to put it in.
Thanks hope yous can help me out .
so would it be like a 6 cyl flywheel/drive plate set up anyway?. or there maybe a 10mm diff between the 4 cyl and 6 cyl sometimes in this model.
I have got a red 186 holden motor to put in her, it is out of a auto set up..
I have a 308 diff and 6cyl shock set up and hubs already and 4 cyl 4 speed in her now. was going to put 202 but didnt happen.
I figr i have to change sump to fit VH set up in over racks and maybe crossmebers?.
the holden sumps are interchangerbale with red, blue, black holden motors just have to get a blue 6 cyl vh one and then move dipstick to other side?.
Will the 186 red motor bolt on to my 4 cyl flywheel/drive plate? or do i need to get one for red motor 6 cyl set up?, and new cluch / plate?.
Also will my 4 speed gearbox work with this 186 motor. I hope it should wire up as normal?
been trying to find all info & sort out before it starts the pulling things out to see how much this going to cost. am i missing anything eals out ??
hopeing I may not have to change much
if anyone has done this please tell/shear with me some info.
please no smart remarks just need some more info thanks as it the only motor now iv got to work with.
NZ dose not have the same rulez with emissions as OZ dose. and it is a recon 186 motor and smaller then the nomal vh 6 cyl is why i got off my mate. i know it ant going to just fit in and needs some changes with red and blue parts and hope all the parts are inter changable. I do have help to put it in.
Thanks hope yous can help me out .