Vibration still !!!!!!!!

[vs2DSIRE]

.

yer you would think but i think it controls the idle . If was buggered it might be givin a **** spark st idle . Also k noticed that at the back right rear the is a hose that hass snap off that comes from the tank around to the back of the tank ????

 

[hako]

Maybe also reset the idle to 100rpm higher and do this the proper way by the book so that the IAC can still control the idle. Maybe your tacho is over-reading.

Re tank hose...that's a possibility too as a vacuum line goes to the tank

 

[nathanVY]

Maybe also reset the idle to 100rpm higher and do this the proper way by the book so that the IAC can still control the idle. Maybe your tacho is over-reading.

Re tank hose...that's a possibility too as a vacuum line goes to the tank

Interested to know more about the vacuum hose...

 

[vs2DSIRE]

.

yer mine snap when i jacked the car up one day and i started the car up after woodd and it was fine so i didnt think much off it . But maybe it does have something to do with it . As for the idle iam unsure off how do raise the idle threew the iac doesnt it have to be set 28mm from the end and that is set right ?????

 

[hako]

There is also a "purge valve" that opens above idle and allows vacuum to be applied to the charcoal canister....if the purge valve is sticky it may be open at idle. You check this (I think) by schecking the vac line from manifold to purge valve at idle.

 

[hako]

yer mine snap when i jacked the car up one day and i started the car up after woodd and it was fine so i didnt think much off it . But maybe it does have something to do with it . As for the idle iam unsure off how do raise the idle threew the iac doesnt it have to be set 28mm from the end and that is set right ?????

28mm is correct. You need a Gregorys manual!!! PM me your email address and I'll scan the base idle page for you. Just turning the screw upsets other parameters!

 

[vs2DSIRE]

.

i fixed the vac line runnung to the tank no luck with that i also noticed that the idler atm moves abit up and down wen in drive it movesjust upand down and makes a ticking kinda knock sound ????

 

[vs2DSIRE]

???

??????????? ????????????

 

[98NVS]

change wheel bearings on front. had same problem

 

[vs2DSIRE]

well toke her to a different mechanic outta town just to see what they had to say and they said theres not a bad thing about my car everything looks good . they couldnt tell me what the vibratation was because dont no were to start , nothings wrong , i also gota exhaust specialised out to have a look they said everything looks really good no problem ??? ive got no idea now haha pretty funny now