Vs series 2 getrag clutch noise

[this guy]

:hmmm: So today when i got home i noticed that with my clutch in there was a weird noise almost like a soft griding sound but when i let off the clutch the noise goes away :help: the box has the DMF clutch setup and it has started to slip abit im guessing its on its way out yeah any help on this subject would be great



Cheers :embarrass

 

[IBLOWN]

Clutch center bearing is worn. But yeah, a new clutch comes with a new bearing.

 

[kiwicon]

Centre bearing as in release bearing?? If so, wouldnt this make the noise the other way round? no noise when engaged, noise when out.

 

[pendles]

spigot bearing when engaged. that would be your noise for sure

 

[IBLOWN]

As pendles said. Spigot bearing sorry. The part that comes with a new clutch kit.

 

[Rufus®]

As pendles said. Spigot bearing sorry. The part that comes with a new clutch kit.

Pretty sure they are a separate item, unless clutch kits have changed in the past few years. But yeah, sounds like a spigot bearing, wouldn't stress too much, next time you do your clutch do the spigot bearing too.

 

[workvs]

Pretty sure they are a separate item, unless clutch kits have changed in the past few years. But yeah, sounds like a spigot bearing, wouldn't stress too much, next time you do your clutch do the spigot bearing too.

They come in the kit. Did one recently.

 

[Rufus®]

They come in the kit. Did one recently.

well bugger me, there you go. its been a few years since I've done one.

 

[K-BAGZ]

I'd still ask the supplier if you get the spigot bearing in the kit, as every brand is different. When I originally purchased my Exedy HD clutch kit, it didn't come with one. Only came with the clutch driven plate, pressure plate assembly and throwout bearing.

 

[yxyx64]

i have never seen a spigot bush in a getrag clutch kit, or t5 kit, or t10 kit, or ........
Spigot goes in crank.