LX_HATCH
Member
- Joined
- Jun 23, 2006
- Messages
- 128
- Reaction score
- 0
- Points
- 16
- Members Ride
- LX Torana-Hatch
Hi,
I have brought a VS V6 T5 for a replacement for my buggered VP one. It looks like the speedo arrangement is different.
The VP T5 uses a driven gear arrangement which then couples to the black electronic sender that sends pulses to the speedo and then ECU.
The new (supposedly) VS one has the a new hole which a speedo sensor fits into. The new speedo sensor has no driven gears etc. The sensor counts the teeth on a gear inside the extension housing.
How do I go about fitting the VS T5 into the VP.
Can the extension housings be swapped so I can retain the VP speedo setup.
Ryan
I have brought a VS V6 T5 for a replacement for my buggered VP one. It looks like the speedo arrangement is different.
The VP T5 uses a driven gear arrangement which then couples to the black electronic sender that sends pulses to the speedo and then ECU.
The new (supposedly) VS one has the a new hole which a speedo sensor fits into. The new speedo sensor has no driven gears etc. The sensor counts the teeth on a gear inside the extension housing.
How do I go about fitting the VS T5 into the VP.
Can the extension housings be swapped so I can retain the VP speedo setup.
Ryan