Your Power & Mods

[YMY-88U]

Make: Holden

Model: VN Berlina Series 2

Year: 1991

EFi, SC, Turbo, Stroked: EFi V6

Mods: K&N, VS S/C CAI, 2.5" redback exhaust, lukey headers, lowered pedders suspension, front ss spoiler, eagle leads

Mods 2 Come: V8 65mm T/B, super low king springs, rear ss spoiler, 17/18" wheels... otherwise looking at selling it

Power: Not much...

Perfromance shop: Supercheap and repco!!!

Comments: looking at selling it within the next couple of months to buy a old holden ute/tunner (hq, hx, hj, hz, wb)

 

[1stGEN68]

Make: Commodore
Model: VX SS 6spd Manual
Year: 2000
EFi, SC, Turbo, Stroked: 5.7 EFI
Mods: 4 Into 1 Pacemaker Headers, Twin 2 1/2" Stainless Steel DT Performance Exhaust, SS Induction Cold Air Intake, SS Air Sensor, SS Throttle Body, HSV MAF Tube, K&N Air Cleaner, After Market Engine Covers "RED" Signed By Mark Skaife And Todd Kelly.
Mods 2 Come: Brake Upgrade "AP Racing" Callipers and Cross drill / Slotted Disks.
Power: 298 @ Flywheel
Performance Shop: D&T Performance W.A
Comments: Goes Good:
driving:

 

[minux]

Make: Commodore
Model: VX SS 6spd Manual
Year: 2000
EFi, SC, Turbo, Stroked: 5.7 EFI
Mods: 4 Into 1 Pacemaker Headers, Twin 2 1/2" Stainless Steel DT Performance Exhaust, SS Induction Cold Air Intake, SS Air Sensor, SS Throttle Body, HSV MAF Tube, K&N Air Cleaner, After Market Engine Covers "RED" Signed By Mark Skaife And Todd Kelly.
Mods 2 Come: Brake Upgrade "AP Racing" Callipers and Cross drill / Slotted Disks.
Power: 298 @ Flywheel
Performance Shop: D&T Performance W.A
Comments: Goes Good:
driving:

298kw at the flywheel with no tune? Running SS reduction gear? Post up the dyno sheet

 

[YMY-88U]

^^ haha so true...

 

[1stGEN68]

Yea Sorry did forget to mention the tune!! From memory tune was worth around 10Kw @ rear wheels

 

[The_Fallen_One_05]

Make: Holden Commodore
Colour: GMH Beige
Model: VH SL
Year: 1982
Mods: 173 or 176 was replaced with a 202 + extractors and a holley carbie, white 5 star mags
Mods 2 Come: 2 1/4 inch exhaust, paint marinello Red, yella terra head, cam, custom cold air intake.

 

[BLACKVZSV8]

Make: Holden
Model: SV8
Year: 2005
EFi, SC, Turbo, Stroked: NA 5.7
Mods: Tune
Mods 2 Come: Heads Cam Zorst Intake
Power: 301rwhp
Performance Shop: Dynod at D&T Wangara
Comments: Prior to tune it ran up 280rwhp with full factory exhaust intake. 301rwhp is after tune and still with factory zorst and intake.

 

[RVN 355]

MAKE: Holden of course
MODEL:VYSS M6 QUIKSILVER
YEAR:2003
DONK:5.7 ls1
PWR:190rwkw's
MODS:Xforce cat back no resi.
FUTURE MODS:Edit,Cai, Lowered,New rims,Big steza,poss cam.

Did you get the x force cat from ebay?

 

[MrFeelgood]

Make: HSV Holden
Model: VR GTS
Year: 1996
Engine: Stroked 355 5.7Ltr, 6 speed box, Hydratrak
Mods: Powerflow 9Psi S/C, 670Hp Bosch Fuel pump, Huge Intercooler, 21Lb Injectors, Chip upgrade
Mods 2 Come: ECU and a nekkid blonde girl (If the mrs is ok with that)
Power: Untested
Performance Shop: Old drag blokes (not in womens clothing)
Comments: Dammmmmmmn anyone wish to sponser my car for tyres ?
Extra comments: I will post Dyno specs and 1/4 times as soon as they become available.
Extra Extra comments: No Doof Doof stereo i left it in the Hyundai (makes it feel faster)

 

[Dan355]

Make: Old Holden
Model: VH SL/E
Year: 1982
Engine: 202
Mods: Head, Cam, Intake, Ignition, Fuel Pump, Rebuilt with acl bearings, Stock bottom end, Nos, Tuned,
Mods 2 Come: Still being decided
Power: 122rwkw Give a few more (Fuel problem fixed)
Performance Shop: A few
Comments: Spun a bloody bearing already. Not happy.Needs paint. Will sell if happy with an offer. 6 speakers