VE Wont Start Or Crank

[RiCeY]

Won't be pump if it's not even cranking.

Have you got a spare key to try?

 

[Kermet]

Hey Ricey...No spare key unfortunately..

before I connected scanner. It started straight away with no issues idling normal, gave a little squirt and put my foot down and wouldn't pass 1500rpm
continued going after some struggle and a few beers reached at 3000rpm will not go pass that. nil warning light on dash btw. Disconnected the throttle gave it a clean with throttle body cleaner put it back on inspected all connections in engine bay that i could get to and all seems OK.
connected scanner on it and came up with these code's. Picture below

Cleared the codes, connected scanner no faults.

bloody thing starts no problems i think if it drives for about 20-30 mins it dies and you cant start it again (its like it needs to cool down) before it will start again.

 

[tml678]

connected scanner on it and came up with these code's. Picture below

That'd be your problem then wouldn't it..?

 

[Kermet]

not sure mate, scanner not picking it up anymore. was just told that i might need to reprogram the computer and to keep in mind that might now even fix the issue.

 

[RiCeY]

What codes are in the TCM?

 

[Kermet]

P0700-00 is the TCM code

 

[disturbance]

Hey all, to jump on this ‘no cranking’ problem: I was fiddling around putting some gauges in an accidentally snipped the battery wire going to the ignition barrel. I soldered it back together again but now the car won’t crank (doesn’t even try) and my plug in OB2 doesn’t read anything either. I’ve did what the other guy suggested and looked at the ECU pins: I’m not getting power to the pin 56 which someone said was power to the ECU?

Anyway. Send help. Any ideas??

VE s2 SV6 Wagon.

 

[07GTS]

if obd isnt reading then u have prob lost comms, best to just check all fuses in cabin/boot and under bonnet

 

[disturbance]

if obd isnt reading then u have prob lost comms, best to just check all fuses in cabin/boot and under bonnet

thanks bro! it was the 'theft detection module' fuse. you're a legend.

 

[Navin Prasad]

I have a Holden commodore VE 2007
Cluster show message contact dealer
Keys turns lights on cluster comes on but engine not cranking

Replace second hand ecu did diagnose still same problem

Changed bcm, and key chip still no crank

Radio still the original

Bought ecu kit from eBay

Need assistance can someone advice what to do