Brett_jjj

Hello Brett
Can you supply me with a GM software version 142 for my Tech 2? If so how do I purchase.

Hi Brett. What is the diagnostic equpment you have? Recommendations? I have VY Series II. Regards

Hey bud sent you message any chance you could help me out with those few questions?

How ya going, Ive got an issue with my VX series 2, IBLOWN sent me your way, car runs fine everything is a.o.k only issue i have is ive got no cluster or dash... no tacho, speedo,fuel, water nothing but ODO and light surrounding it work, cant even access the mode functions or anything

Can you help me out with some advice???

hey mate can you get a diagnostic connector for a vr if so where can i pick one up from and how much cheers kris

Hey mate its kris you helped me with a question about power windows in my vr acclam and my bcm is mid so that means that i can run power windows im so happy that u can do it thanks for all help

Hi all I have a VZ 8/06 Holden and I wish to buy a Tech 2 or cable to hook up to my laptop from a local Australian company or importer where i can see what I am buy and assist with back up I live in Sydney.
Regards Ron

Hi Brett, I'm having a problem with my immobiliser. I noticed in a thread you sounded like you knew what you were talking about. Would you mind giving me a call on 0437771256. I know you don't know me but I would really appreciate it and I believe you could solve my troubles...
All the best,
Bayles

Hey Brett, I tried messaging you but it said your messages were full!

(BB Code quote is not allowed).
I was searching (like a good forum user does) and I stumbled upon your post about idling, quote;

"When I first start my VS V6 of a morning, the engine will rev up to around 1500 rpm and then it will slowly drop back to around 700 -800 rpms as the idle stabilises.

I have the exact same "problem" I call it, does your VS still do this?
I'd like to know what causes it, finally found my Haynes manual and I've had a look, from what I've read its the IAC valve that might be dirty or not working properly, I'd just like to get your feedback on this..

Cheers, Nick.

Hey Brett, hope you are well.

How do I pull the file off a Tech 1 A catridge from the EPROM without taking out the catridge? Can it be done with the serial cable to PC using TIS2WEB?
Any help would be awesome.
Cheers