Search results

Hey jboz1992, did you get a resolution to your problem yet? If so, what was the cause of the problem as I'm sure many on here would like some feedback.

Because your problem (according to the fault codes you've given) appear to be restricted to the passenger side bank of cylinders (ie: 2, 4, & 6) I'd be looking at a dirty or corroded electrical connection on that side of the engine. If you've washed your engine down and haven't blown out all...

If I were you I'd first try turps (turpentine) on the windows to see if it lifts the acrylic sealer. From my experience, turps works very effectively on acrylic paint removal even though the acrylic paints are water based. Turps will definitely NOT affect the two pack paint on your car as it's...

I have a January, 2006 built Calais V6 and it has all the niceties that existed in the earlier 2005 Calais. The reversing mirrors are included as is the glove-box light, active select for the 5 speed transmission, power operated front seats etc. The main difference is that 2006 build...

Glad to have been of some help KillerCV8. With regard to the Workshop Manual on CD/DVD you should have no problem convincing the dealer unless he doesn't want to make any money. I've got one of the genuine GMH Service Manuals on DVD for the VZ. Bought it in July 2007 just after it was...

No photo but yes you can get a black two hole bezel for the TC and Phone. I've got one in my VZ Calais. GMH part number for the bezel is 92116191 and the black phone switch is part number 92172330. Both these items cost me $26.92 all-up back in 2008 when I purchased them. Whether it's a 6...

More likely you've zapped the BCM or other module by carrying out the work without first disconnecting the battery - that's a NO-NO especially with the reliance of these vehicles on computer modules. If you've heard a sound which you describe as "zzzz" it's probable that you've short circuited...

Hi again Khoder. From what you've said in above response you've got the third connection correct (Light Blue from body harness connected to yellow from trailer harness). I've checked my trailer harness and can verify the following for you:- . GMH Part number is 92144494 (there is a label...

Hi Khoder - I also have a VZ Calais that I fitted a genuine towbar to back in 2006. I've been attempting to attach the fitting instructions on here for you to use but can't get the file size down small enough for it to accept. According to the instructions the Black lead from the car's body...

Simple answer. Buy the three of them - then sell the ones that don't fit on eBay.

The rocker covers have a formed gasket around the perimeter (silicone rubber compound by the looks of it) AND three of what is called in the service manual "Camshaft Cover Spark Plug Port Seal". Obviously these spark plug port seals are compressed by the camshaft covers when they are installed...

"Check Oil" warning is definitely an indication of low oil pressure being sensed by the ECM (Engine Control Module). You said that mechanic told you it had a slight oil leak so he cleaned the motor down!!. Could it be that the oil pressure sender under the oil filter is the point of the oil...

Best advice - put the standard VZ Calais wheels back on. Those ones you've put on look hideous.

You say that the transmission is "full" How do you know that? It's a 5 speed and can only be checked with transmission fluid at operating temperature, engine running and then with the filler plug removed from underneath the vehicle while in a level position. Is that what you have done...

Had the same trouble with my VZ when using my good old chequer-plate ramp that my dad passed down to me. They had detachable ramps, that separated from the platform the vehicle sat on when elevated. Anyway I solved the problem by buying some additional 6mm floor-plate (replacement for the old...

Matty, You're after info on a tune for your 5 speed auto which seems to indicate that you've solved your earlier problem with the transmission (water in it and not having any forward power). Can I ask you what was the solution that you achieved to get the transmission fixed? And approx what...

I'd be checking that your fuel pump is working if I were you. I recently replaced my fuel filter following the service instructions contained on the genuine service manual CD to the letter. Basically the steps involved de-pressurising the fuel lines (before disconnecting the fuel lines at the...

Have you resolved the issue of where the water entered the transmission? If not then you're only going to possibly get re-contamination probably through the radiator tank where the transmission fluid passes supposedly to get some cooling effect. Additionally, it is absolutely essential that the...

The VZ Commodore DVD (not CD Rom) version of the workshop manual is actually titled "Holden Service and Maintenance Information DVD for:- VZ and Calais Series including MY2005 and MY 2006 WL Statesman and Caprice, including MY 2005 and MY 2006". Its Holden part number is VZ102006 (at least it...

Further to Spargo's post above, not only must the transmission oil be at optimum running temperature BUT also the vehicle must be well elevated to allow access under vehicle (and of course supported on vehicle safety stands), be sitting level (both front to rear and side to side), have engine...

From your latest post where you indicate that a "funny sound" came from the engine today, I would suggest it would be worthwhile for you to get someone experienced to temporarily put an oil pressure gauge on the engine to verify actual oil pressure during driving conditions. Could be that you...

An extract from the VZ Factory Service Manual (file attached) gives an explanation of your problem. Certainly appears that you have an oil pressure problem - either actually low oil pressure, a faulty oil pressure sender or a problem with the wiring from the oil pressure sender.

An update on the VZ Bluetooth compatability issues - I have read all the postings here and was ready to go out and purchase an aftermarket kit and just buy the genuine switch, bezel and phone patch. However yesterday I decided to just check out with reputable dealer regarding the Bluetooth...

If you guys are talking about the CLEAR perspex over the instrument cluster then the best way to clean marks off that is with Brasso. Now I know a lot of you will say boo hoo to that BUT Brasso is probably the second finest abrasive paste (only jeweller rouge is finer). Brasso used (not too...

And with the release of the updated Euro emission spec VZ's (from January 2006) that's also why GMH did not include "Alloytec 190" lettering on the engine covers of the supposed 190 kw engine - because it lost some kw's meeting the updated emission standards. All the remainder of the omitted...

I like the sump guard you have on the ute (shown in the photos). Could you please tell me where you sourced it, what brand it is, and approx cost to buy please. I presume it's made of something other than plastic??

Yep, as "Monster" has pre-empted it is in the fuel tank combined with the fuel pump assembly. Verified this through the VZ Service CD.

Try Nolan O'Rourke. They are auto upholsterer suppliers in Sydney who have been supplying fabrics to the auto trade for years.

VZ Workshop Manual (covering MY 2005 & MY 2006 Commodores including all body types and special release models) is available on CD at your local Holden Dealer now. I purchased one at Sutton's Lidcombe warehouse on 16/7/07 at a cost of $450.00 trade price. Part number is VZ102006...