Search results

I got it on and it took me 20 min to fit. That stupid clip was behind the back of the seat. I brole 2 clips but replacements were with the replacement clip.

the clip is easy to take off and put back on. You have to use a flat head screw driver and insert it between the seat and the back part of the seat and find the end of the clip and jam the screw driver betwen it and turn the lumbar until it pings off. To put it back on just put the clip back on...

My mate who works for a ford dealership got it for me it was $30 with clips supplied thanks for your help Accentstencil

I am having trouble removing the back cover off one of my seats. I cannot seam to be able to remove back adjuster, which is holding it down. I need to remove this so I can replace my broken magazine pocket, which I have a replacement ready 2 go on. There is no clip or anything else I can see to...

:bang: :bang: :bang: :bang:

I have ordered a humax exhuast and pacemaker headersfor my VT 3.8L 6. I am wondering will i need 2 cats with this system as the stock exhaust has 1 cat. I am asking because i have seen two cats put on a singel system i am not sure with this exhaust as Humax is not a common talked about Brand...

You stole those pics from cheersandgears.com forum stoops:ranting:

Oh bich bitch bitch. You people make me sick. the car will get heavier but holden will make up for the fueal consumption. If you havent noticed they have a new exhaust and we all know what that is going to do. SAVE ****ING FUEL. You all think that holden are a bunch of dumb asses. They...

Geez Original.. huh? Looks nice but those rims are 2 common and you could have done so much better than those. Most people just see the inchs and thing whooah must have them, give me NOW!

Taken from Drive.com.au VE Commodore secrets revealed The Sydney Morning Herald Friday April 7 2006 Holden’s Australian icon, the Commodore, will have more foreign parts to keep prices down and European styling flair to broaden its appeal. But will that be enough to entice buyers away...

high output alloytec loss of 5Nm what the hell? grow a brain we want more torque so we can catch up yo fords straight six

In my VT power wire an orange cable with a white stripe and your can run the RCA where ever you want as long as they are no where near a power cable or power source and obviously somewhere they can not be damaged. I am wodering why you need power from your ciggy ligter?

It could also be that the amp is running to hot and turns its self off. Mine does it all the time

No worries mate :king:

Thanks for the help soneX know i can get some 6*9's and hook up to my JBL amp. I just need to find some that can handle 104w RMS for each channel

wheels latest reall pic of VE I told you it was the VE. Some people did not belive me and you know what up yours i found the pic and i was right. I found it before most people were aware of it being on the road in the states(USA)

i am wondering how you installed your 6*9's on the rear parcel shelfall i have are groves in the parcel shelf. are there holes under there to mount 6*9's

This is another pic i have found of the new commodore it is left hand drive but this pic was taken in america(pontiac). It looks like a ahatch back from this angle but it has been made to look like that so they don't recognise it as a holden. if it is a hatch back then why does it have a dual...

If you put the pics up side by side they look the same. But i did notice that it looks like it is left hand drive.

NICE want one bad. Maybe a new font spolier will make it look heaps better though just a sujestion. VZ clubby front end would look awersome.

I found some grat pic of the new VE its well hidden under foam and stickers that contrast poorly. None of that piss weak car bra ****. Holden really wants to keep it under raps :coolpimp:

i dirve about 70km per day and 55km of them is doning 110km/h on the hish way i can get 800 km if i keep it under 2500rpm while accelerating but it stays under 2000rpm on the highway at 110. Awersome for a VT series 1 V6

High/low pass filter You should have a swithch on your amp that has hP=high LP=low and flat simple

*Better Rules* P-platers should be able top drive these high performance cars but there also should be restrictions. I think that there should be a curfew on 8's Super6's and Four's and no turbo with a power to weight ratio of 100KW per tonne. But all car should go by the vic rule of no more...

I would sujest removing the rubber skirting on the doors ( just rip it off and clean up any bits of glue and crap with some eucalyptus oil and it will come up lookin spiffy) otherwise nice job with the kit :)

Pioneer KEH-P4020 head unit Pionner 6 disc stacker mounted on fold down seat Pioneer 6" 220watts X4 in doors JBL gto75.4 - 4channel 540watt rms amp (4 gauge amp wires and 12 gauge speaker wires) in my Sliver VT SEDAN

Yeah my vt wont rip a burnout in a straight line. but if the road is wet or has a light sprinklinging of dirt then we burn the tires a bit. Who really cares about standstills anyway. Sideway with the streering wheel on full oposite lock is much better ( while freakin out the drivers behind and...

Iceman to remove the door locks you need something pointy and sharp. You need to pic out the orange tabs on the lock. These will need to be replaced if you really make a mess of it. Mine just have a little groove where i have pull them out with a knife. These poop out towards you so try and...

:flame: all it is is the flasher relay under the stearing cluster. If it is broken you just pull it out and replace with a new one from supercheap auto. I recently had the same problem but when the car was off i pulled the indicator stick back towrds the back of the car as far as i could and it...

The Best place to wire up is a orange and white striped cabble in side the divers side kick pannel which is 12V constant and then earth the rest of it off into the body work (eg. screw). You will need a torque screw driver to open this panel.

or you could connect it up to your amp or head unit and get the neons lighting up every time you get a heap of bass

problem getting out the orange tab i am having trouble getting out the orange tab i am wondering if you could show us with pics exactly how to remove them eg pry them from the top of tab or bottom:bang: