Purplecrewy
New Member
- Joined
- Jun 17, 2006
- Messages
- 25
- Reaction score
- 0
- Points
- 0
- Age
- 62
- Location
- Sydney
- Members Ride
- VY SS Crewman
I am in the process of pulling my manual box out of my SS as the slave Cylinder went. I was quoted $550.00 and feel this is a waste of money as they tell me the Slave Cylinder is a throw away part. I am into a little engineering and will fit some new seals and have them matched and noted for future referrence. I am also told that the heat build up is quite a bit inside the bell housing so i am placing some louvered ventalion covers in the bell housing. I am also running an external (easy accessable) bleeder to the out side of the bell housing for future bleeding and re-newing of fluid. Once i do the calculations and dimensions i am also thinking of cutting an access hole to remover the Slave Cylinder without removing the box which is such a stupid idea holden have done. The price of the seals will be about $15.00 and add the waste of the throw away Slave Cylinder and the labour and with my modifications i believe my labour and efforts will be worth it. If anyone is interested in the mods please give me a message.
Thanking you
Steve
Thanking you
Steve