after marked dizzy

[crabby]

evening all ,
i am having trouble finding the plug that goes into the hall effect sensor plug on the ute running a 5 liter from a vq( the one on the loom) as mine is stuffed. i bought a replacement dizzy and has the blue oval hall effect sensor attached to it but can not find the plug that goes into it anywhere and im not paying 250 or more for a complete loom for one plug. so i am wondering if there is an after market dizzy i can put in its place ???? like this one ...here... so i can bypass the plug

thanks

crabby

 

[Immortality]

I wouldn't be using anything from that supplier period.

You still need to plug into the factory loom because the PCM needs a timing signal for everything to run properly.

 

[crabby]

thanks for the heads up do you know if you can do a swap from the older blue oval plug to the newer black square plug on the dizzy ? i can get the other half i need with the black sensor but cant with the blue sensor without buying a whole loom ? i can just buy the sensor kit then

thanks

 

[Vs hsv manta]

Look up - EFI hardware

They will be able to supply you with the plug you need

 

[crabby]

thanks , will give them a ring today :spot on:

 

[crabby]

no luck yet again , rang efi hardware and they dont stock or have that part available
back to the drawing board
thanks for the help

 

[Immortality]

Could try these guys but they are in the US

www.eficonnection.com