94 Stato V8
Member
- Joined
- Jun 13, 2006
- Messages
- 52
- Reaction score
- 0
- Points
- 6
- Location
- Riverland
- Members Ride
- 2010 VE Series 11 wagon, 2014 VF SV6 Storm Ute
got a problem with the Stato not changing gears properly. Checked the fault codes and got :-
Code 66 3-2 shift control solenoid circuit fault
Code 67 Torque Convertor Clutch on/off solenoid circuit
Code 81 2-3 Shift solenoid "B" fault (what the hell is a "B" fault?)
Any ideas where to start looking for the problem?
Could it just be a computer problem that needs resetting?
Could it be a dirty connector not letting signals thru?
Just clutching at straws I guess.
Putting in reverse the car rolls backwards normally,
put in drive and it feels like the handbrake is partly on, it doesn't seem to roll freely forward, and yes I've checked all wheels are free rolling by jacking individually.
Any help guys??
Tim
Code 66 3-2 shift control solenoid circuit fault
Code 67 Torque Convertor Clutch on/off solenoid circuit
Code 81 2-3 Shift solenoid "B" fault (what the hell is a "B" fault?)
Any ideas where to start looking for the problem?
Could it just be a computer problem that needs resetting?
Could it be a dirty connector not letting signals thru?
Just clutching at straws I guess.
Putting in reverse the car rolls backwards normally,
put in drive and it feels like the handbrake is partly on, it doesn't seem to roll freely forward, and yes I've checked all wheels are free rolling by jacking individually.
Any help guys??
Tim