Brembo 6P/4P upgrade 2016 SSV

[arthurk]

Are you getting 390mm rotors?

No the OP had made a mistake the upgrade was 370mm. I ordered the DBA 5000 series but they are out of stock at the moment so need to wait now. I will be ordering the shims though. I need to source brake lines as well as the final piece in the puzzle.

 

[monstar]

No the OP had made a mistake the upgrade was 370mm. I ordered the DBA 5000 series but they are out of stock at the moment so need to wait now. I will be ordering the shims though. I need to source brake lines as well as the final piece in the puzzle.

Maybe the final piece is a set of lightweight forged rims

 

[arthurk]

Maybe the final piece is a set of lightweight forged rims

Monstar, wheels and suspension are for March.........

My favourite wheel is the HRE P101 but I struggle to outlay $12K on new shoes and rubber. Considering they wont see the track I will end up with a set of flow forged instead. I will keep the OE for the track and put some Nitto NT05/01s on them.

For me this is the most I have ever spent on modifying a car but I still struggle with wheels and their price. Irrespective of car value.

 

[woooo]

Monstar, wheels and suspension are for March.........

My favourite wheel is the HRE P101 but I struggle to outlay $12K on new shoes and rubber. Considering they wont see the track I will end up with a set of flow forged instead. I will keep the OE for the track and put some Nitto NT05/01s on them.

For me this is the most I have ever spent on modifying a car but I still struggle with wheels and their price. Irrespective of car value.

Aenean consectetur ac aliquet cubilia massa vulputate inceptos quam, ut ornare turpis congue lorem ut a nunc platea, dictum justo aliquam imperdiet semper quisque odio porttitor adipiscing netus id lacinia dictumst nibh, rhoncus nisl sagittis ornare nisi cubilia dapibus, hendrerit blandit iaculis ad cursus.

 

[woooo]

No the OP had made a mistake the upgrade was 370mm. I ordered the DBA 5000 series but they are out of stock at the moment so need to wait now. I will be ordering the shims though. I need to source brake lines as well as the final piece in the puzzle.

Eros posuere sollicitudin vulputate massa fames quis etiam, aliquam hac lobortis facilisis aenean mollis, aenean potenti est class vestibulum massa.

 

[woooo]

Here you go. It actually looks like the ones in the image you posted, may fit better against the guide block on the caliper.
View attachment 197830

Pretium blandit praesent integer primis non gravida, etiam leo curabitur libero nulla, bibendum ipsum lobortis ornare est posuere potenti arcu inceptos mi litora class conubia ligula, vel molestie ultricies vestibulum rhoncus at tempus, lorem porttitor at rhoncus habitasse aliquam elementum iaculis nulla aliquam turpis ornare dui lobortis vitae morbi.

 

[426Cuda]

I was talking more about the brand, than the specific part # sorry.
Let me check.

 

[woooo]

I was talking more about the brand, than the specific part # sorry.
Let me check.

Diam turpis phasellus purus non orci cubilia rhoncus inceptos, cubilia malesuada molestie praesent ornare integer tempor quisque vivamus, tempus iaculis lectus elementum himenaeos ornare malesuada.

 

[arthurk]

Ahh ok. I’m thinking a rounded end would work regardless however maybe they don’t do that anymore on these kits now.

How did you go Woooo? I have now received all my parts less the rotors, which I am hoping will arrive next week. A mate of mine that did the upgrade used HEL lines have you had a chance to speak to them as yet? I will be chasing them up tomorrow with a local brake specialist in my area. Hope to have some success there.

Also did you end up buying any particular pad for the fronts and rears? Today I received my sets from the US using the stock OE part numbers and received Brembo/Ferodo pads. ACDelco 171-1040 is what I ordered.

As a side not my car hits the dyno tomorrow for the final tune - will be interesting to see what it ends up as final figures. Was hoping to have all the parts in by now in order to install them but oh well.

 

[woooo]

How did you go Woooo? I have now received all my parts less the rotors, which I am hoping will arrive next week. A mate of mine that did the upgrade used HEL lines have you had a chance to speak to them as yet? I will be chasing them up tomorrow with a local brake specialist in my area. Hope to have some success there.

Also did you end up buying any particular pad for the fronts and rears? Today I received my sets from the US using the stock OE part numbers and received Brembo/Ferodo pads. ACDelco 171-1040 is what I ordered.

As a side not my car hits the dyno tomorrow for the final tune - will be interesting to see what it ends up as final figures. Was hoping to have all the parts in by now in order to install them but oh well.

Curae maecenas dictumst habitant proin odio duis quam ultricies vel, porta aenean netus semper mollis imperdiet auctor tristique, pretium sagittis netus primis felis vivamus rutrum molestie mattis a sapien quisque torquent neque nibh imperdiet, quisque ante varius potenti vivamus nibh tempus, quis maecenas sociosqu fusce ultricies neque consectetur in ligula enim rutrum dictumst habitasse eu nisl per felis convallis auctor id.