Charg'd's VT XU6

[1vngal]

S2 lights look the goods

Be better once we get the wiring on the interior lights right!

 

[CeasarXR]

Be better once we get the wiring right!

The wiring should'nt be an issue,it should be identical.

 

[Charg'd]

The wiring should'nt be an issue,it should be identical.

nah it isnt, ill figure it out one day

 

[CeasarXR]

nah it isnt, ill figure it out one day

By S2 light's,this obviously means your Series 2 tail light's......Correct?
Well what is different in relation to the wiring setup......Again,it should be identical.It's a straight swap.

 

[CHEETR]

wiring is the same on 1 and 2 brent....

 

[Charg'd]

wiring is the same on 1 and 2 brent....

its the same for the series but different for the model. eg, calais is different to berlina

 

[CeasarXR]

its the same for the series but different for the model. eg, calais is different to berlina

What are you on about?
Series 1&2 have the stop/tail and indicator assembly set up in an identical fashion.The only difference oviously being the colour of the indicator lens.
I fail to understand what you are trying to imply!.

 

[Jesterarts]

Im guessing he is trying to put calais or sumfin lights on his car so he needs the loom that goes through the boot to the lights in there?

 

[CeasarXR]

Im guessing he is trying to put calais or sumfin lights on his car so he needs the loom that goes through the boot to the lights in there?

Well thank you my good man,but that loom is already in place.
All he needs to do is purchase a calais/berlina garnish and harnesses to suit.
That's only if he's going for the calais/berlina look,if not the other s2 tail lights should need no modification as the job they do is identical.

 

[1vngal]

What are you on about?
Series 1&2 have the stop/tail and indicator assembly set up in an identical fashion.The only difference oviously being the colour of the indicator lens.
I fail to understand what you are trying to imply!.

Ummm....we never said anything about wiring to the tail lights. The tail lights are all done, all thats needed is the orange globes. My post about the wiring was for Mattman, I thought he was referring to the interior lights, not the tali lights. There, all edited to save any further confusion.

Im guessing he is trying to put calais or sumfin lights on his car so he needs the loom that goes through the boot to the lights in there?

Nope wrong

Well thank you my good man,but that loom is already in place.
All he needs to do is purchase a calais/berlina garnish and harnesses to suit.
That's only if he's going for the calais/berlina look,if not the other s2 tail lights should need no modification as the job they do is identical.

Why would we want to go for the Calais/berlina look, when we already have the HSV look?