Cold air intake alternatives

[devilr8]

Hey guys, just need some help, I just fitted a new 56mm Adrad radiator into my vz Clubby.
But now because the A/C condenser sits further forward my Duspeed OTR CAI wont fit now.
So any suggestion on an alternative that actually fits with this size radiator would be awesome

 

[Kiddo]

Can we get some pics? Hard to tell without seeing.

 

[devilr8]

as you can see the condenser now sits where the intake usually sits.

 

[Grennan]

Can you tilt the radiator a little? I know with some OTRs they try and tilt the radiator slightly backwards at the top.

 

[devilr8]

Not sure if that would be possible, it slots into that factory mounts, plus there isn't much room to move between the shroud and the front of the engine now.

 

[vr304]

Any particular reason u fitted a bigger radiator?

 

[devilr8]

Any particular reason u fitted a bigger radiator?

the plastic tanks on the standard radiators have failed a couple of times over the years since I've owned it, figured this would overcome this problem, probably a little overkill but haha

 

[st3r3otyp3]

Around 30mm would have sufficed, you can mod the stock air box deleting the MAF sensor and inserting some 4inch aluminum or S/Steel exhaust pipe, or use a older GTS mafless pipe, all will cripple you numbers a bit.

 

[st3r3otyp3]

P.s that radiator is good for one thing BURNOUTs.

 

[devilr8]

Around 30mm would have sufficed, you can mod the stock air box deleting the MAF sensor and inserting some 4inch aluminum or S/Steel exhaust pipe, or use a older GTS mafless pipe, all will cripple you numbers a bit.

All good now, I've managed to squash down the condenser enough so the intake clears it.